[switch精品软件]hekate 5.1.3&Nyx 0.8.6 整合下载

[switch精品软件]hekate 5.1.3&Nyx 0.8.6 网盘下载，是一个不可多得的switch工具，值得收藏哦！

• Fixed an issue with booting CFW on < 7.0.0
  A missing check was causing old versions to boot complete stock.

• Fix issues with the usual sd card suspects when doing a warmboot based reboot.
  The SD Card regulator is now disabled on HW init and re-enabled at the appropriate time.

• Support for Atmosph&egrave;re experimental content.
  Use the fss0experimental=1 key on a boot entry to enable it. For now it's only for NCM.

• Support fatal context version AFE2

• Add more Minerva checks, in case it is paired with old bootloader folder contents.

• Support coreboot.rom chainloading that is not 1MB.

• emuMMC

• Fixed all touchscreen issues. In Nyx and HOS.
  In case you have the issue, you can boot Nyx while pressing VOL- and VOL+.
  This will force a re-calibration of the touchscreen. (The tool version will come later.)
  Do not run this if you don't have issues, it is intended as a mismatch touchscreen calibration fixer

• Fixed an issue with lvGL heap which was causing hangs

• Fix Archive bit tool when filepath is bigger than 256 chars.

• Allow canceling of emuMMC creation

• Fixed an issue with HOS 1.0.0. Based on m4xw/emuMMC

• Nyx v0.8.6

• 修正了在7.0.0下启动CFW的问题

•  

• 缺少检查导致旧版本启动完整库存。

•  

• 修正了通常的SD卡疑犯在进行基于热启动的重启时的问题。

•  

• SD卡调节器现在在HW init上禁用，并在适当的时间重新启用。

•  

• 支持Atmosph&egrave;re实验内容。

•  

• 在引导项上使用FSS0Time= 1键来启用它。现在它只适用于NCM。

•  

• 支持致命上下文版本AFE2

•  

• 添加更多的米勒娃检查，以防与旧的Bootloader文件夹内容配对。

•  

• 支持不是1MB的CoeBoo.ROM链负载

•  

• 修复了所有触摸屏问题。在NYX和HOS中。
  如果有问题，可以在按下VOL-和VOL+时启动Nyx。
  这将强制重新校准触摸屏。（工具版本稍后提供。）
  如果没有问题，请不要运行此程序，它将用作不匹配的触摸屏校准修复程序
  修复了导致挂起的lvGL堆问题
  当文件路径大于256个字符时修复存档位工具。
  允许取消emumc创建